Here are a few bits of wordplay and some interesting insights, it is always fun to recreate the logo in a more enlightening way, regards Arto.
Synthonyms VII
March 10, 2018The Induction Computer Part 4
October 17, 2017The Induction Computer Part 4
by Arto Juhani Heino (c) 2017
I am back from the wilderness, the experiences of Spring has overwhelmed my Audio and Visual organs, natures beauty is beyond any simple description. The last post I never mentioned the Trinary system that took my designs closer to a complete new type of thinking to develop a Trinary ALU, much more interesting than the Binary approach. Here is the 555 timer I promised from the last post, it is closer to a build-able relay design than my first prototype.
I didn’t show any parameters for the Basic Logic Cell. Here is my sizes and reasoning:
The Basic Logic Cell – Logical Unit
Working from the true measure the Royal Cubit approx 523.24mm, rounding to 525mm. The Palm is four fingers and seven palms make the Royal Cubit.
75mm x 75mm Sqr (aprox 3″ x 3 “)= 1 square Palm.
18.75mm Thick(rounding to 19mm, aprox 3/4” ) = 1 finger thick.
This was why I chose the Ancient Royal Cubit, when you measure the longitudinal velocity of light in royal cubits equals exactly 900000000. Thus it is the exact measure of the Royal Cubit.
Velocity of Light = C
= 299792458 mtrs sec
Longitudinal Velocity of Light = Pi/2 x C
= 1.5708 x 299792458
= 470912891.8272 = CL
Therefore
= CL/900000000
=470912891.8272/900000000
= 0.5232365 Mtrs
= 1 Royal Cubit
This means all your measures you use on materials is concordant to a universal standard, so by coordinating Electrical, Sonic and Hydraulic wave forms in your Logical Unit, all the impedance issues would be known, thus engineer-able.
The Universal Binary Engine
To complete my journey back to relays here is one draft of the Universal Binary Engine, it was designed to be used with a rotary commutator in mind, I was considering the technology of 1900 and the implementation of the Tesla tower as a the hub of computing the Longitudinal Ground Wave communication traffic he would have had to encounter if his tower was finished. Here are my preliminary data covering the commutator and/or relay computer. I have dubbed it “The Universal Binary Engine“, it has motoring logic built in, so a rotating system is viable, a whole new way of conveying intelligence through simple matrix connections with commutators , setting up codes for binary transmission in as many bits as needed. This would be similar to the type of computer switching system Tesla could have worked out during his Wardenclyff period, to direct the control of a complex communication system, with subscribers numbering into the hundreds of millions, not bad for pre-transistor or valve era. Each bit would be just another commutator in rows of switching array commutators, this way you can accommodate large address locations on the globe using a whole wave node number(Earth circumference wave number derived from the frequency of operation) and the directions NSEW as your location matrix. I have a vision in my mind regarding the operational frequencies and mechanical rotating frequencies to make such a system operate as a World Wireless System (NOT Radio), here is a draft PDF of one of my ideas. Here. As this was about laying the most simplest wiring and layout, where you could his own switching systems as per Patent 685953, as illustrated in my Volume I, page 343. I always draft my original designs by free hand sketches and hand written work books, while I am design the Trinary version as well this way, I only draw my work on computer long after I have cleared up any mistakes, either physically tested or carefully worked out on spread sheets.
Trinary
Here is list of the first 6 Trinary single input logic gate operations, there are more that I will list shortly.
The Switch is of great importance here, the three distinct actions are of a greater Logic to apply than just on and off. The beginning of a decision tree within the three way action, yes, maybe, no. Where most will see the “0” as a null action it is a vital internal pivot to allow a current flow in be diverted for other operations, as you will see in these basic two input relay gates.
The design scheme was very involved, looking at history and to develop a version that was simple and functional, as my earlier designs show we can still lose the battery and use magnets. The next few gates tested my underlying geometry as a square 5 internal layout.
I have completed the Or, Nor, Xor and Xnor gates and the many other possible logic gates have been noted and configured for future design steps.
The ideas for using the new found parameters available haven’t been explored in the main stream forums as yet, it is not so much the answers they can provide but what are the questions we need to ask and what solutions these gates can provide, we are looking for problems that need solving, this is what will propel these ideas forward. Here is the third page of the steps to arrive at a simple Trinary system with only batteries, switches and leds.
This table below shows some my more interesting breakdown of Logical Gates and new concepts of interaction with the extra three Logical operators to complete another Axiom to investigate.
(18×18)/2 = 162
162 approximates PHI
Thus in an abstracted manner, I am applying natural arithmetic, with a golden Ratio as its final Sum.
I am still working on these and will add another post soon, Regards Arto.
The Induction Computer Part 3
July 25, 2017The Induction Computer – Part 3
by Arto Juhani Heino (c) 2017
From my last entry I hinted at a 555 relay emulation, I am not quite their yet, I am getting close though. Here is my current stage I am on at the present moment.
I needed an ALU to start things of, so I started on the Half-Adder as a building block, here is my iterations.
The next step is the Full-Adder and its first few iterations from Logic Gates.
Lastly I have included a simple idea of how some of these could be interpreted in the 3D world, more to come on this aspect in a future blog.
If your response is high enough, I will start a Patreon account and begin building the real thing, regards Arto.
The Induction Computer Part 2
July 8, 2017The Induction Computer – Part 2
by Arto Juhani Heino (c) 2017
It looks like I am reinventing the wheel, minus valves and transistors, this work might even seem redundant to some of the techno-nerds. I assure you this is a step forward, there has been no time in the last 50 years that all those electronic enthusiasts have been able to simplify and create something without an official corporately designed IC package doing all your brain-work for you, leaving nothing for your own original imagination. I was very excited many years ago when many hobbyists made their own computers from discreet transistors and IC packages, while a few even made some relay ALUs.
While I thought of making my own CPU from relays but resisted, I first needed to create a new architecture that could incorporate an open 256 bit CPU and a Analog CPU in one package, while still accessible enough to be built by hand. This was part of my goal, as the architecture had to be robust, to last 1000 years, the components were to be the built environment and the power to drive it should be available 24/7, sounds like a pipe dream of some mad scientist. I only dare to dream of its reality and decided to rediscover the simplicity and the basic technology to make it plausible. The idea of using stone to contain the complex logical matrix that can be accessed via simple interfaces is the final reality, the many steps to arrive at that outcome might outstrip my lifetime, still I will persist, as I cannot dismiss a vision that is clear and within the realms of possibility.
Enough of my machinations, here are some interesting and practically solved devolutions of known devices from my last posting. Here is a FlipFlop made from two relay NAND gates.
While the idea of a Operational Amplifier kept me awake for a night of two, I hope to emulate a 555 IC chip from my work here, just in time to compete a chapter in my Volume II.
This version should satisfy many of its Integrated Chip operations, still it is a crude and very fundamental design, useful to be expanded upon with a bit more work. I must repeat, I am not an electrical engineer and I have no degree from any University, I am truly a ground up natural scientist, where my tenets of understanding come from a life time of artistic creativity with careful observations and practical applications. I hope those who are interested can learn much from my ideas. Regards Arto.
The Induction Computer
July 1, 2017The Induction Computer
by Arto Juhani Heino (c) 2017
Here are some interesting combinations using relays as logic gates, which was where I began this first step into the Induction Computer.
As you can see I have “single relays” and “double pole relays” and “Latch relays”, an old technology that goes back to the beginnings of the study of electromagnetism in the 1800’s. My studies into remnant magnetism of different materials, brought me into an understanding of natural rocks and the possibility of using either “Granite”, other rocks or even a poured casting as a magnetically imprinted “Logic Matrix Array”, storing functions, complex procedures, information and even pictures, videos and music.
In the Voltage Multiplier I have even eliminated any semiconductors, even diodes and batteries, while only using coils, capacitors, magnets and relay operations. You can see my process of elimination and the final schematic being without any high tech micro components.
There are a few parts to make the whole system function, here are some of the descriptions for the Voltage Multiplier.
The Slab that must have
1 Remnant Magnetism within permissible limits
2 Flat Surface, possibly engraved for descriptive and functional reasoning
3 Location keys for Imprinter and Reader
The Matrix Imprinter
1 Magnetic Array
2 Electromagnetic Array
3 Reset and Wipe function
The Induction Reader
1 Layered Switch Array
2 Geometric Coil Matrix
3 External Switches/Buttons and Levers/Handles arced or rotary
Physical Actions of Operator
1 Generate Voltage
2 Instigate Switch Operations
3 Discharge to external device
As this blog article is only to describe some of my work, it is not the whole article, that you will find in my next volume of “Talking To The Birds” Volume II. If the interest in these ideas are popular, I would consider a FundMe or Patreon profile and begin the arduous progress of a working system , regards Arto.
Artext Poetics
June 5, 2017Here are a few poems that I recently published on All Poetry, I have also added the titles in my freshly minted writing system “Artext”,(note – the spelling offence is deliberate), regards Arto.
Gene Soul
by Arto Juhani Heino
My creator speaks to my genes
I find it accompanies my dreams
My Eyes find harmony in my creations
My mind is free to allow such beautifications
Do we question our being when nature is our designs
Have we a soul in our frame or is it us genes who finds.
The Blinded Book Face
by Arto Juhani Heino
Nary a whimper,
A glimpse of cognition,
Only blank stares,
And mindless glares.
This is the breed that
has been corralled.
Only opinions and echos,
Sad delusion of plastic civility.
Prediction of Offence
by Arto Juhani Heino
Quite words of solidarity,
Angry voices of peace.
Vicious attacks on piety,
Whispers for genocide.
Am I blinded by darkness,
When depths are so high.
Pander the cruelty,
Bury the kind.
A Clear Perspective of Co2
June 1, 2017Here is a reasonably accurate volumetric equivalence for man made Co2, which in the true scale of natures processes is an insignificant amount and of no concern to our future, cows fart far more green houses gases than mankind makes. Pollution of our food and local environment should be of more concern than a natural gas that is required for our living system. Historically the Earth has had many more times the Co2 than the present by many factors of scaling. Regards Arto.
Fake News
February 9, 2017I have stopped watching my TV about 15 years ago and I have been feeling ill about watching “Liberal” Fake News channels the last 8 years, the ones come to mind from America are CNN, NBC and ABC. The list very long which should include Australian junk like ATN, TCN and TEN they all pander to a mental delusion of what News really is. Not only the News channels but Facebook is full of posts that come from the same fake and dubious “Main Stream Media”. Here are some graphics that came out of this distaste and the inspiration from a direct and honest portrayal of MSM by the wonderful President of America, Mr Donald J. Trump.
I will add more to this post as time goes, regards Arto.
Arto on the Walk – Day 5 to 6
October 15, 2016Promo –
“Art On The Walk, at the Henry Deane Plaza Monday 10th – Friday 14th October between 8.00am-7.00pm. Over the week follow each work of art on facebook.com/henrydeaneplaza and get a chance to vote for your favourite artist at henrydeaneplaza.com.”
Day 5
The day was fine and slightly windy, my drawing was bombed with bird dropping at least 6 times, much cleaning and adjustment was needed to fix those wounds. I mainly focused on tonal rendering and added a small frog(kek) to the drawing, many small areas of focus to clarify the multi-level story that was unfolding.
I was asked many things by the audience, one thing I did say more than once, “If Rembrandt was working on a drawing in his studio for a number of weeks before he started to paint, this would be the equivalent drawing. The difference would be, I am in the middle of Sydney, drawing on the ground, in a plaza with thousands of passers by, chatting and taking photos, working for only 5 days, I am sure Rembrandt would find the 21st century an undesirable place, noisy, full of distractions and not a place to contemplate deep and meaningful ideas on a drawing board, let alone a master work. ”
I talked to many while I defined the artistic vision, getting ever closer to the end. A few more small things and all was done.
Day 6
I arrived at 9.20, I had missed an earlier train. I just added 4 leaves on the main tree and cleaned someones absent minded foot prints from 2 parts of the drawing. Minor adjustments to some needed areas, signed it and all was done. In those 5 and a bit days I spent at least 7 hours a day standing with my legs apart drawing with the end of the pencil, enjoying every painful lunge, with a great desire to render my deep ideas , I never felt tired or listless, only pure CHI, as I had only honor and love to drive all my inspirations, not monetary gain.
The photo is not quite the best, I had a problem with the lighting, I will re-post a better picture in the future.
Uncovered Folklore
I hope you enjoyed my creative journey, I will write a 20 page essay on the meaning and my considerations that took place while I dug deep into what has occurred in the history of the 20th century and what we have forgotten about from our ancient past, something I contemplated in those 5 days, where many others I know would take years for same outcome, as a masterwork does not fall out of an empty shelf.
Many decades of drawing have taught me to simplify the subject, harmonize the composition and let the viewer become involved in the process of piecing the story together, without too many complex thematic images or jarring abstracted ideas, each which can take away the underlying beauty and truth of artistic expression.
Modern art (or Post Modern Art) has no longer a place in the life of man in the 21st century, it has completely failed in communicating a balance of the deep emotional needs, spiritual and intellectual wants of a complex world that has incoherent images thrust into every aspect of our daily life. As a working Artist I have passed though the fire and brimstone of every modern art genre and found that our survival as intelligent, self reliant humans have been sorely compromised by the fake “isms” that has its only goal of supplying a never ending stream of “junk art” to fill the Modern/Post Modern Art Industry, enriching the Galleries and destroying the Artists. I have made it my goal to restore the faith in the ability of our Artists to present beauty, truth and a deep dialog with those who want to become enlightened in our population. My art has a tradition that is thousands of years old and it will survive many more, the deconstruction of art in the 20th century was but an aberration doomed to destroy itself and finally become something to be scorned.
Thanks for following my work, Regards Arto.
Arto on the Walk – Day 1 to 4
October 13, 2016Promo –
“Art On The Walk, at the Henry Deane Plaza Monday 10th – Friday 14th October between 8.00am-7.00pm. Over the week follow each work of art on facebook.com/henrydeaneplaza and get a chance to vote for your favourite artist at henrydeaneplaza.com.”
The passers by can watch the compositions grow from a few sketchy lines to the completed artwork, I am very excited to be drawing at the very hub of the Sydney commuters. I am looking forward to putting many hours of creativity for the public to enjoy, please come and visit, if not then follow our progress on Facebook. If you do not know me, do not be afraid to have a small chat while I work, I do enjoy entertaining a large crowd while dancing on the end of a pencil, LOL, Arto.
My running commentary:
Day 1
A nice warm day, perfect to attack the paper with some quick pencil sketches. The other Artists are a terrific bunch of hard working crafters, good enough to scare the pants out of the average sketcher.
They day went well and I completed the initial sketch in record time, I worked like lightening, without hardley a break, I hope my crowd pleasing pencil dance inspired all in attendance, LOL.
Day 2
It was failing light near 6.30pm, I was struggling to get a clear photo of drawing. My leg muscles ached all day but I still carried on, just too much fun for this old dude LOL. I have 3 more days and all I will be doing is increasing detail and I will not add any colour, as the overwhelming response from the public was keep it as a pencil drawing. I agree, the paper that we are using is not suitable for my classical approach to pastel/watercolour/gouache, yet I could just smudge my way through and ruin a very comprehensive pencil drawing, which this paper is an excellent choice.
The cotton paper of choice would have cost over $100 a sheet, not economical for a live venue, where problems can occur with wind and weather. My only choice is to use this as a drawing in its own right rather than sully it with an unsuitable medium. The crowds have been fantastic and very responsive to our live drawing, all the Artists involved are absolutely the nicest folks around, not to forget the quality organizers.
Day 3
I forgot to take photos on day 3, my legs muscles were wrecked LOL, try lunges for 9 hours and you’ll understand ouch !! I did a lot of detailed work that day, arriving home at 9.15, a very tired Art soldier.
Day 4
My legs muscles improved overnight but the weather didn’t. The day was filled with strong gusts and threats of rain, to offset that, the drawing went smoothly and crowds were fantastic!!! 🙂 Some extremely interesting visits from members of the public, I am definitely a fan of those that pass through Henry Dean Plaza LOL. The sprinkling of rain come late in the afternoon, while all the Artists acted as a highly co-ordinates team of well trained professionals picking up all the artwork in less than a minute!! You just got to love all the Artists in the group.
Some of us worked in the storage room from sometime, until the rain abated, then another burst of rain came, then back out again. It was a fun day for all with many laughs while birds bombed our artwork with their droppings LOL We are looking forward to the last day for everybody to put their finishing touches on each work.
See you Tomorrow with the picture file when its completed, Regards Arto.
Artojh's Renderings 
